Interceptor Build - for the old timers...

Like the name says...

Interceptor Build - for the old timers...

Postby Nuts » Fri Mar 24, 2017 9:22 pm

Hi all,

It's been a bit quiet here.

Been working on a new interceptor for near a year now and thought this would be a good time to introduce the journey, if I was ever going to.

She’s nearly finished and we finally tried turning the key this week for the first time, bringing her to life. Bit like flicking the switch on Frankenstein perhaps, being all wired up to monitor the vital signs, but you still don’t know exactly what was going to happen…

100a.jpg
100a.jpg (84.18 KiB) Viewed 1243 times


:o
Comment above borrowed from my brother at the time....
Last edited by Nuts on Mon Mar 27, 2017 4:50 am, edited 3 times in total.
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Re: Interceptor Build - for the old timers...

Postby Nuts » Fri Mar 24, 2017 11:22 pm

Since this is Mad Max and not (Mad Max 2 which was filmed in sequence.) I’m going back to the beginning. Call it the Editors or Directors cut perhaps. Haven’t had word on the exact engine condition anyway...

Got the idea for a build from a magazine article, years ago, about some guys building MM replicas in W.A… assumed Grant and Gordon.

Watched a couple of cars sell recently, not that I was prepared to spend that much! (They’re in Australian Dollars.)

101.PNG
101.PNG (114.86 KiB) Viewed 1243 times

Some build pictures at :
Https://www.australianmusclecarssales.c ... again.html


102.PNG
102.PNG (98.36 KiB) Viewed 1243 times

Some build pictures at :
http://www.caradvice.com.au/355681/that ... terceptor/
Last edited by Nuts on Mon Mar 27, 2017 5:05 am, edited 6 times in total.
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Re: Interceptor Build - for the old timers...

Postby Nuts » Fri Mar 24, 2017 11:39 pm

Started checking out some coupes, once I worked out the type of car I was looking for.

104.JPG
104.JPG (90.78 KiB) Viewed 1191 times


103.jpg
103.jpg (107.74 KiB) Viewed 1243 times


108.JPG
108.JPG (68.34 KiB) Viewed 1243 times


109.PNG
109.PNG (306.75 KiB) Viewed 1243 times
Last edited by Nuts on Thu Mar 30, 2017 1:59 am, edited 2 times in total.
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Re: Interceptor Build - for the old timers...

Postby Nuts » Fri Mar 24, 2017 11:53 pm

131.JPG
131.JPG (71.9 KiB) Viewed 1176 times


Took her home, got her to put her clothes back on.......? and gave her, her new identity.


143.JPG
143.JPG (68.75 KiB) Viewed 1140 times
Last edited by Nuts on Fri Apr 07, 2017 5:37 am, edited 3 times in total.
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Re: Interceptor Build - for the old timers...

Postby Nuts » Sat Mar 25, 2017 2:04 pm

144.PNG
144.PNG (239.59 KiB) Viewed 1274 times
Last edited by Nuts on Mon Mar 27, 2017 4:58 am, edited 3 times in total.
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Re: Interceptor Build - for the old timers...

Postby Nuts » Mon Mar 27, 2017 3:21 am

I have no reason to doubt:

- The original November 1973 Falcon XB GT was bought new in New South Wales with the rego of GPV-996.

- In 1975 the vehicle became Victorian rego IFE-509.
During filming MM1, circa 1977 in Victoria, the vehicle was filmed on public roads and also transported cast and crew. Therefore it had to retain registration.

- A few years after MM2, Bob Fursenko got it back on the road acquiring rego 5188 TA (courtesy Mad Max Museum, Silverton)
Last edited by Nuts on Tue Mar 28, 2017 3:37 am, edited 4 times in total.
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Re: Interceptor Build - for the old timers...

Postby Nuts » Mon Mar 27, 2017 3:47 am

Here's an October 1973 XB GT Coupe on Ebay yesterday in need of restoration. Was advertised for $65,000 AUD prior.
http://www.ebay.com.au/itm/252821920568#ht_185wt_1266

I guess I wouldn't have got far converting an XB GT Coupe since my full budget was around 50 to 60K. At a guess I wouldn't have been too popular with some either...

Mine's a Falcon 500 perhaps GS ? Cost $29,000- AUD
It had everything GT except: Tramp Rods, Rear discs with larger bearings, top of door trims, curved type arm rests, GT seats, vinyl around glove box, GT door cards and a GT compliance plate.

182.JPG
182.JPG (90.18 KiB) Viewed 1245 times


183.jpg
183.jpg (83.34 KiB) Viewed 1245 times


189.JPG
189.JPG (77.4 KiB) Viewed 1245 times


200.JPG
200.JPG (70.64 KiB) Viewed 1245 times


217.jpg
217.jpg (50.83 KiB) Viewed 1245 times
Last edited by Nuts on Sat Apr 01, 2017 9:06 pm, edited 6 times in total.
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Re: Interceptor Build - for the old timers...

Postby Nuts » Mon Mar 27, 2017 4:05 am

223.JPG
223.JPG (62.57 KiB) Viewed 1245 times


Painted over the paint in the engine bay in Black 2 pack gloss.
It's the only place I feel we took a short cut, by not stripping the paint off first... However, many others had done it that way I've noticed.

250.JPG
250.JPG (79.5 KiB) Viewed 1245 times


260.JPG
260.JPG (76.06 KiB) Viewed 1245 times


266.jpg
266.jpg (88.16 KiB) Viewed 1245 times
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Re: Interceptor Build - for the old timers...

Postby Nuts » Tue Mar 28, 2017 4:03 am

305a.jpg
305a.jpg (70.33 KiB) Viewed 1224 times


322.jpg
322.jpg (75.63 KiB) Viewed 1224 times


Found two providers advertising Interceptor kits. One was from Mad Max Cars.
http://www.madmaxcars.com/products/prod ... x_Body_Kit

The other was from Cameron Manewell. We used Cameron's kit......
http://www.ebay.com.au/itm/Mad-Max-Inte ... 559wt_1200




324.jpg
324.jpg (75.23 KiB) Viewed 1224 times


340.JPG
340.JPG (70.75 KiB) Viewed 1224 times


345.JPG
345.JPG (71.9 KiB) Viewed 1224 times
Last edited by Nuts on Sat Apr 01, 2017 10:16 pm, edited 1 time in total.
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Re: Interceptor Build - for the old timers...

Postby Nuts » Thu Mar 30, 2017 2:04 am

350.JPG
350.JPG (72.73 KiB) Viewed 1191 times


385.JPG
385.JPG (81.32 KiB) Viewed 1191 times


391.jpg
391.jpg (80.48 KiB) Viewed 1191 times


Now to mount the nosecone.....

430.JPG
430.JPG (74.03 KiB) Viewed 1191 times


GOTO PAGE 2
Last edited by Nuts on Sun Aug 20, 2017 12:37 am, edited 2 times in total.
Nuts
 
Posts: 68
Joined: Fri Jul 08, 2016 10:28 pm

Next

Return to Film Cars and Replica Cars

Who is online

Users browsing this forum: No registered users and 2 guests