Immortan Joe's Mask!

Discuss items from the film, making replicas, and so on.

Immortan Joe's Mask!

Postby Immortal Props » Wed Dec 02, 2015 9:05 am

Greetings!

I wanted to share this replica mask I created with fans of the Mad Max series, and I thought this would be a good place to start.

I first sculpted the entire mask out of Monster Clay, then made a silicone mold using Rebound 25 from Smooth-on. The mask itself is impact-resistant resin (65D from Smooth-On), poured into the silicone mold. The mask is very durable, without being too heavy. It is great for wearing or as a display piece on your collector's shelf.

Each mask is hand painted by me, and takes about 2-3 hours. I make the leather straps using lightweight, but very durable saddle string leather. There are 2 buckles used to adjust the straps, allowing the mask to rest at any height and tightness around your head. This allows for ultimate comfort to ensure it fits you just right. I recommend tightening the straps so that the nose bridge of the mask is up between your eyes. This will alleviate any pressure of it resting on your nose, and if you look at the photos, Immortan Joe's mask is worn high on his face. This is how the mask's overall look was designed to be worn, and it will look the best on you if you aim for that positioning.

As you can see, the mouth/lower jaw area can open and close. I use high-strength magnets that I have embedded in the front teeth. This allows the mouth, when closed, to stay shut. If you want to pose the jaw open for photos, or to fit a straw up there and drink, you can! Simply use your hand and open the jaw to the desired position, and tension will hold it there until you shut it.

The hoses you see are real gas mask hoses, scavenged from retired Russian gas masks. These seem to match his hoses the best from the movie. I only provide the 2 grey hoses you see in the photos, the black hoses will have to be rounded up by you. I have seem them for sale on e-bay from several vendors. If you're willing to spend a little time looking I'm sure you can find a pair that fits just right. The size of the hose opening seems to be fairly standard.

Finally, I have attached 1/2 inch thick, high-density foam for comfort on the inside of the mask. There is a piece on the nose bridge and lower jaw/cheek areas. This helps the mask situate on your face better, without the irritation. The resin can easily be lightly sanded and more padding added if so desired.

Thanks for taking the time to read this little walk through of my process and for viewing the photos. Please share this work with your friends and anyone you think might like to see this completed work. I do sell these masks as well through my etsy shop. I have 4 different options available, ranging from unpainted with no hoses, to the one you see in the photos here. If interested, please check out my shop! Link is just below:

http://www.etsy.com/shop/immortalprops

Photo Sep 23, 12 16 32 PM.jpg
Photo Sep 23, 12 16 32 PM.jpg (164.99 KiB) Viewed 2708 times
Photo Sep 23, 12 13 45 PM.jpg
Photo Sep 23, 12 13 45 PM.jpg (142.68 KiB) Viewed 2708 times
Photo Sep 23, 12 12 46 PM.jpg
Photo Sep 23, 12 12 46 PM.jpg (112.64 KiB) Viewed 2708 times
Immortal Props
 
Posts: 2
Joined: Wed Dec 02, 2015 8:38 am

Re: Immortan Joe's Mask!

Postby Daz » Sat Dec 05, 2015 2:42 pm

I'll give you 50 bucks for it.
Daz
 
Posts: 523
Joined: Sun Aug 23, 2009 6:30 pm

Re: Immortan Joe's Mask!

Postby draknoir2 » Wed Dec 09, 2015 11:47 am

Beautiful [if you can call it that] work!

Very impressive.
"Two days ago, I saw a vehicle that would haul that tanker. You want to get out of here? You talk to me."
User avatar
draknoir2
 
Posts: 478
Joined: Tue Jan 24, 2006 4:53 pm
Location: Chicago Area

Re: Immortan Joe's Mask!

Postby MWFV8 » Thu Dec 10, 2015 2:55 am

Seriously impressive work!
"Wrong, we fight for a belief. I stay."
User avatar
MWFV8
 
Posts: 1089
Joined: Sat May 15, 2004 2:06 pm

Re: Immortan Joe's Mask!

Postby draknoir2 » Thu Dec 10, 2015 5:06 pm

I do some casting, molding, and prop making myself - use a lot of Smooth on products. But that's some artistic talent right there.
"Two days ago, I saw a vehicle that would haul that tanker. You want to get out of here? You talk to me."
User avatar
draknoir2
 
Posts: 478
Joined: Tue Jan 24, 2006 4:53 pm
Location: Chicago Area


Return to Costumes and Props

Who is online

Users browsing this forum: No registered users and 2 guests


cron